Giantz Petrol Water Pump 3" High Flow Transfer Fire Fighting Irrigation

Adjustable Pressure Switch Water Pump Controller Black Suitable for various pumps such as Jet pumps, Stage pumps and garden pumps, this impressive water pump controller is your reliable working partner. It's packed with great specifications and features that make it perfect. Everything is made easy where it automatically switches your pump on/off on open/closing of any tap. It provides stable performance, requires low maintenance and is long lasting; it is one of the few that will exceed your expectations. Features Fully Adjustable Digital Electronic Pressure Controller Switches your pump on/off as water is required Provides full automatic control of the pump Provides stable performance Requires low maintenance Long lasting CE, C-tick certified Voltage: 220/240V, 50/60Hz Max. Current: 10A Frequency: 50/60Hz Protection grade: IP65 Max. Water temperature: 60 degrees Starting pressure: 1.5-3 bar Max. Pressure for use: 10 bar Dimensions: 22 x 15 x 15cm Weight: 1.5kg Inlet and outlet size: 1"(25mm) Screw for Strating-up Pressure Adjustment : Consult Experts before Adjusting Package Contents 1 x Water Pump Controller 1 x User Manual Delivery excludes the following postcodes: 885, 2222, 2449, 2818, 2827, 2829, 2836, 2839, 2874, 2898, 3724, 4477 4490, 4626, 4822, 4871, 4875, 6044, 6209, 6224, 6290, 6442, 6536, 6562 6707, 6713, 6725, 6728, 6743, 6751, 6753, 6754, 7255, 7256, 7258, 7260

When low water pressure gets you down, power it up with our Peripheral Water Pump. Pumping out at a rate of 35L/min with a delivery head of 35m and suction up to 8m, it is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. Use it to pump your pool, increase water pressure in your pipes, water your gardens, irrigate, clean and more. The water pump features an IP-rated commercial copper motor, rust-resistant brass impeller, cast iron pump body, 1-inch inlet and outlet ports, efficient TEFC cooling system, mountable base and a power box that is both waterproof and dirt-proof. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. There is no need of any sophisticated knowledge of pumping, just a little imagination of how much you can do with it. It will pump up the water in no time. Features:Automatic pump controlRobust rust-resistant brass impellerMountable baseTEFC cooling systemHigh head and steady flowLow power consumptionEasy installationEasy to operate and maintainIdeal for pool pumping, increasing the water pressure in the pipe, garden sprinkling, irrigation, cleaning and more Specifications:Peripheral water pumpPower: 0.5hp/370W 220-240V/50HzMax suction: 8mMax head: 35mMax flow: 35L/minProtection: IP44Inlet/outlet size: 1-inchWire: CopperPower cable: 90cmImpeller: BrassStator: 45mmMax pressure: 3.5barNoise level: 70Db Pump controllerVoltage: 220/240V, 50/60HzMax. current: 10AFrequency: 50/60HzProtection grade: IP65Max. water temperature: 60°Starting pressure: 1.5-3barMax. pressure for use: 10bar Package Contents:1 x Peripheral Water Pump 1 x Pump Controller Delivery excludes the following postcodes: 885, 2222, 2449, 2818, 2827, 2829, 2836, 2839, 2874, 2898, 3724, 4477 4490, 4626, 4822, 4871, 4875, 6044, 6209, 6224, 6290, 6442, 6536, 6562 6707, 6713, 6725, 6728, 6743, 6751, 6753, 6754, 7255, 7256, 7258, 7260

When low water pressure gets you down, power it up with our Peripheral Water Pump. Pumping out at a rate of 35L/min with a delivery head of 35m and suction up to 8m, it is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. Use it to pump your pool, increase water pressure in your pipes, water your gardens, irrigate, clean and more. The water pump features an IP-rated commercial copper motor, rust-resistant brass impeller, cast iron pump body, 1-inch inlet and outlet ports, efficient TEFC cooling system, mountable base and a power box that is both waterproof and dirt-proof. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. There is no need of any sophisticated knowledge of pumping, just a little imagination of how much you can do with it. It will pump up the water in no time. Features:Automatic pump control Robust rust-resistant brass impeller Mountable base TEFC cooling system High head and steady flow Low power consumption Easy installation Easy to operate and maintain Ideal for pool pumping, increasing the water pressure in the pipe, garden sprinkling, irrigation, cleaning and more Specifications:Peripheral water pumpPower: 0.5hp/370W 220-240V/50HzMax suction: 8mMax head: 35mMax flow: 35L/minProtection: IP44Inlet/outlet size: 1-inchWire: CopperPower cable: 90cmImpeller: BrassStator: 45mmMax pressure: 3.5barNoise level: 70dB Pump controllerVoltage: 220/240VFrequency: 50/60HzProtection grade: IP65Max. current: 10AMax. operating temperature: 60°Max. working bar pressure: 10barInlet/outlet size: 1"(25mm)Dimensions: 22cm x 12.4cm x 17cmColour: Yellow Package Contents:1 x Peripheral Water Pump 1 x Pump Controller Delivery excludes the following postcodes: 885, 2222, 2449, 2818, 2827, 2829, 2836, 2839, 2874, 2898, 3724, 4477 4490, 4626, 4822, 4871, 4875, 6044, 6209, 6224, 6290, 6442, 6536, 6562 6707, 6713, 6725, 6728, 6743, 6751, 6753, 6754, 7255, 7256, 7258, 7260

When low water pressure gets you down, power it up with the GIANTZ 5-stage Water Pump. It's the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You'll find our 5-stage water pump particularly useful for homes, household gardens, farms, commercial entities or any situation where pressurised water is consistently required.The GIANTZ 5-stage Water Pump features an IP rated commercial motor, full stainless steel pump body, cast iron ends, one-inch inlet and outlet ports, corrosion-resistant brass connectors, efficient cooling system and not least, built-in run-dry thermal protection.Pumping out at a rate of 9000L/hr with a 64m head, the 2500W water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any 240V socket.Whether you're using the pump as a permanent installation or on an ad hoc basis, you can be assured of dependable and reliable water supply in more ways than one. FeaturesPowerful 2500W self-priming multi-stage pumpGarden irrigation, farm irrigation & home water supply100% duty cycle - Designed for continuous operationRust resistant stainless steel pump body w/ cast iron endsFully automatic operation on/off controllerHuge 64m head - Perfect for applications over two storiesAnti-corrosive alloy motor housing, ceramic and carbon sealsBuilt-in thermal protectionEfficient cooling systemHighly conductive copper motor – Efficient & low heat generationCorrossion resistant brass connectorLeak proof rubber ringEasy connecting plug and cableFully automatic pressure controllerAdjustable start-up pressureAustralian standard cable and plug1 year warranty – We are always ready to back you up Specifications:Pump:Maximum Power: 2500W / 3.5HPMaximum Flow: 150L/min, 9,000L/hrMaximum Head: 64mStage: 5 stagesPlug & Cord: SAA 250V/10A *0.6mBrass connector: 1"Inlet/outlet: 1"Casing: stainless steelMotor: Copper wireProtection class: IP44Mechanical Seal: Ceramic/ CarbonController:Voltage: 220/240VFrequency: 50/60HzMaximum current: 10AMaximum water temperature: 60 degreesStarting pressure: 1.5-3 barMaximum. pressure for use: 10 barProtection grade: IP65Inlet and outlet size: 1" (25mm)Dimensions: 22 x 15 x 15cmColour: BlackPump weight: 15.5kgController weight: 1.5kg Package Content(1) 5 Stage Water Pump x1(1) Pump Controller x1 This product comes with 1 year warranty

Weatherproof | 2500W | 9,000L/H Flow RateWhen low water pressure gets you down, power it up with the GIANTZ 5-stage Water Pump. It's the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You'll find our 5-stage water pump particularly useful for homes, household gardens, farms, commercial entities or any situation where pressurised water is consistently required.The GIANTZ 5-stage Water Pump features an IP rated commercial motor, full stainless steel pump body, cast iron ends, one-inch inlet and outlet ports, corrosion-resistant brass connectors, efficient cooling system and not least, built-in run-dry thermal protection.Pumping out at a rate of 9000L/hr with a 64m head, the 2500W water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any 240V socketWhether you're using the pump as a permanent installation or on an ad hoc basis, you can be assured of dependable and reliable water supply in more ways than one. FeaturesPowerful 2500W self-priming multi-stage pumpGarden irrigation, farm irrigation & home water supply100% duty cycle - Designed for continuous operationRust resistant stainless steel pump body w/ cast iron endsFully automatic operation on/off controllerHuge 64m head - Perfect for applications over two storiesAnti-corrosive alloy motor housing, ceramic and carbon sealsBuilt-in thermal protectionEfficient cooling systemHighly conductive copper motor – Efficient & low heat generationCorrossion resistant brass connectorLeak proof rubber ringEasy connecting plug and cableFully automatic pressure controllerAustralian standard cable and plug1 year warranty – We are always ready to back you up Specifications:Pump:Maximum Power: 2500W / 3.5HPMaximum Flow: 150L/min, 9,000L/hrMaximum Head: 64mStage: 5 stagesPlug & Cord: SAA 250V/10A *0.6mBrass connector: 1"Inlet/outlet: 1"Casing: stainless steelMotor: Copper wireProtection class: IP44Mechanical Seal: Ceramic/ CarbonPump weight: 15.5kgController:Voltage: 220/240VFrequency: 50/60HzMaximum current: 10AMaximum water temperature: 60 degreesMaximum working bar pressure: 10 barProtection grade: IP65Inlet and outlet size: 1" (25mm)Dimensions: 22 x 12.4 x 17cmColour: YellowController weight: 1.5kg Package Content(1) 5 Stage Water Pump x1(1) Pump Controller x1 This product comes with 1 year warranty

2000W Swimming Pool Water Pump The water pump is able to handle salt water or chlorine filtered pools. Its built with a corrosion resistant marine grade cast iron motor housing and chemical resistant thermoplastic filter and cartridge tank body which allows the pump to be tough and durable. It provides efficient and effective cleanin with its in built filtration basket designed to capture and prevent fine debris from entering the pump. Features: * Suitable for pools up to 80,000 litres* Max flow rate of 30,000L/hr or 500L/ min* Suitable for salt, chorine, in-ground and above-ground pools* Corrosion-resistant marine grade cast iron motor housing* Chemical-resistant thermoplastic filter cartridge tank body* Durable construction* Removable lint and hair trap/ filter* Transparent twist on cover* Built-in thermal protection* Instruction manual* One-year warranty Specifications: * Rated power: 2000W/2.7HP* Max. Pump rate: 30,000L/H or 500L/min* Max. Head: 16m* Max. Grain/ particle size: 2.5mm* Max. Temperature of water handled: 35 degree Celsius* Inner & outer pipe diameter: Australian Standard 48mm & 55mm* Pipe Compatibility: Fit 48mm plumbing internally and 55mm plumbing externally* Length of cable: 1.2m* Noise Level: <65dB * Weight: 13kg Package Content:1x Swimming Pool Pump 1x Manual

1200W Swimming Pool Water Pump The water pump is able to handle salt water or chlorine filtered pools. Its built with a corrosion resistant marine grade cast iron motor housing and chemical resistant thermoplastic filter and cartridge tank body which allows the pump to be tough and durable. It provides efficient and effective cleanin with its in built filtration basket designed to capture and prevent fine debris from entering the pump. Features: * Suitable for pools up to 70,000 litres* Max flow rate 20,000L/hr or 333L/ min* Suitable for salt, chorine, in-ground and above-ground pools* Corrosion-resistant marine grade cast iron motor housing* Chemical-resistant thermoplastic filter cartridge tank body* Durable construction* Removable lint and hair trap/ filter* Transparent twist on cover* Built-in thermal protection* Instruction manual* One-year warranty Specifications: * Power: 1200W/1.6HP* Voltage/Frequency: 220~240V/50Hz* Max. Pump Rate: 20,000L/hr or 333L/min* Max. Head: 12.5m* Max. Grain/ Particle Size: 2.5mm* Diameter of Inlet/ Outlet Pipe: 1.5 "" (38mm)* Length of Cable: 1.2m* Max. Temperature of water handled: 35 Degree Celsius* Noise Level: <65dB * Weight: 7.8 Kg Package Content: 1x Swimming Pool Pump1x Manual